Materials for Batik

The tools and materials used in batik are simple and readily available.
Any tool that can efficiently transfer hot wax from a container to the fabric will serve to produce a design on cloth when it is dyed. At the simplest level, a lighted candle can be used to distribute drops of melted wax on the fabric. A variety of objects such as bent wire or the rim of a tin can, can be dipped in melted wax and pressed onto the cloth to make a design. However the serious artist uses the brush. The best to use is about a Number Twelve water-color brush. The brush needs to have a large enough tip to retain a good quantity of wax. A larger brush for waxing out large areas of cloth is very useful as is a small brush-a Number Six is about as small as one can use-for delicate work.

The selection of waxes is important to the quality of the finished batik. Paraffin and beeswax are the two waxes most commonly used in batik and are usually combined in different proportions.

Because of its ready availability the best fabric for most batiks is cotton. The weave of the cloth should not be too close, and the fabric should be translucent when held in front of a light. For the best results, the fabric to be waxed should be stretched on a frame in a taut manner to prevent wrinkles which may cause the wax to run in an unpredictable way.

Wax is an inflammable substance, so the wax container should not be placed directly on the source of heat. It should sit in boiling water, and care should be taken to see that the water is replenished as it evaporates.

As with painting, color is an integral part of batik. A painter uses pigment; a batik artist uses dyes. The Painter can, if he chooses, completely obliterate an undesirable color by covering it with another color. Perhaps he must wait until the unwanted color is dry, but there is no doubt about it, he has another chance, he can cover up his mistake.

In batik the correction of mistakes, in most cases, is impossible. The Painter is not limited in any way in the variety of colors he uses and juxtaposes. In batik, however, each color used is significantly changed by the proceeding color; or at least it is certainly affected by the color "underneath". The only pure color is the first one, so all other colors used are mixtures, determined largely by the first color, or the first strong color.

Procces To Make Batik

The technique of batik is a demanding one. In general, the final design must be conceived before the picture is begun. The batik artist works intimately with color; if he wishes parts of his design to be light yellow, for example, all these parts must be waxed at the same time before any subsequent dyeing. He cannot isolate one part of his design and complete it before moving on to the others as an artist in oils or watercolor may; he must create his design in stages, each of which encompasses the whole picture.

The basic process of batik is simple. It consists of permeating an area of fabric with hot wax so that the wax resists the penetration of dye.

If the cloth we begin with is white, such as bleached cotton, linen, or silk, then wherever we apply hot wax that area will remain white in the final design. After the first waxing the fabric is dipped into a dye bath whose color is the lightest tone of those to be used. When the piece has dried, we see an area of white and an area of cloth that is the color of the first dyeing. Wax is now applied to those parts in which we wish to retain the first color, and the entire fabric is immersed in the second dye bath whose color is darker in tone than the first. This process is repeated until the darkest tone required in the final design has been achieved. When the fabric, now almost wholly waxed, has dried it is placed between sheets of absorbent paper and a hot iron applied. As the sheets of paper absorb the wax they are replaced by fresh sheets until the wax is removed. At this point the final design is seen clearly for the first time.

Technique Of industrialization

The application of wax with a canting is done with great care and therefore is very time-consuming. As the population increased and commercial demand rose, time-saving methods evolved. Other methods of applying the wax to the fabric include pouring the liquid wax, painting the wax with a brush, and putting hot wax onto pre-carved wooden or copper block (called a cap or tjap) and stamping the fabric.

The invention of the copper block developed by the Javanese in the 20th century revolutionized batik production. By block printing the wax onto the fabric, it became possible to mass-produce designs and intricate patterns much faster than one could possibly do by using a canting.

Batik print is the common name given to fabric which incorporates batik pattern without actually using the wax-resist dyeing technique. It represents a further step in the process of industrialization, reducing the cost of batik by mass-producing the pattern repetitively, as a standard practice employed in the worldwide textile industry.

History Of Batik

Wax resist dyeing technique in fabric is an ancient art form. Discoveries show it already existed in Egypt in the 4th century BCE, where it was used to wrap mummies; linen was soaked in wax, and scratched using a sharp tool. In Asia, the technique was practiced in China during the T'ang dynasty (618-907 CE), and in India and Japan during the Nara period (645-794 CE). In Africa it was originally practiced by the Yoruba tribe in Nigeria, Soninke and Wolof in Senegal.

In Java, Indonesia, batik predates written records. GP. Rouffaer argues that the technique might have been introduced during the 6th or 7th century from India or Sri Lanka.] On the other hand, JLA. Brandes (a Dutch archeologist) and F.A. Sutjipto (an Indonesian archeologist) believe Indonesian batik is a native tradition, regions such as Toraja, Flores, Halmahera, and Papua which were not directly influenced by Hinduism have an old age tradition of batik making.

GP. Rouffaer also reported that the gringsing pattern was already known by the 12th century in Kediri, East Java. He concluded that such a delicate pattern could only be created by means of the canting (also spelled tjanting or tjunting; IPA: [tʃantɪŋ]) tool. He proposed that the canting was invented in Java around that time.

Batik was mentioned in the 17th century Malay Annals. The legend goes when Laksamana Hang Nadim was ordered by Sultan Mahmud to sail to India to get 140 pieces of serasah cloth (batik) with 40 types of flowers depicted on each. Unable to find any that fulfilled the requirements explained to him, he made up his own. On his return unfortunately, his ship sank and he only managed to bring four pieces, earning displeasure from the Sultan.

In Europe, the technique is described for the first time in the History of Java, published in London in 1817 by Sir Thomas Stamford Raffles who had been a British governor for the island. In 1873 the Dutch merchant Van Rijckevorsel gave the pieces he collected during a trip to Indonesia to the ethnographic museum in Rotterdam. Today Tropenmuseum housed the biggest collection of Indonesian batik in the Netherlands. The Dutch were active in developing batik in the colonial era, they introduced new innovations and prints. And it was indeed starting from the early 19th century that the art of batik really grew finer and reached its golden period. Exposed to the Exposition Universelle at Paris in 1900, the Indonesian batik impressed the public and the artisans. After the independence of Indonesia and the decline of the Dutch textile industry, the Dutch batik production was lost, the Gemeentemuseum, Den Haag contains artifacts from that era.

Due globalization and industrialization, which introduced automated techniques, new breeds of batik, known as batik cap and batik print emerged, and the traditional batik which incorporates the hand written wax-resist dyeing technique is known now as batik tulis (lit: 'Written Batik'). At the same time Indonesian immigrants to Malaysia and Singapore brought Indonesian batik with them